ZENER AC Soft Starters
Options
Control Supply (24VDC)
The standard control supply voltage is 24VDC with the following current requirements.
This provides low voltage power to the soft starter’s operator console and keeps it powered without 415V present.
Other Control Supply Options
A choice of other control supply options are available as shown below.
Remote Console (IP66), CAT-5
A remote Console is available with the MSC-3 which allows the functions of the console to be remotely mounted.
The console includes comprehensive display of motor operating status, menu access for programming and FWD/REV/STOP and speed control.
Option Board: Ethernet & Data Logging with SD slot
A plug in option card that provides an Ethernet port (Modbus) . This board also includes the Data Logging function and SD Slot.
Option Board: Data Logging with SD slot
A plug in option card that logs parameters and the operation to an SD card.
Data is recorded at a rate of 1/10th second during ramping and every 10 seconds during running.
Fuse Kits
Semiconductor Fuse Kits are available to provide protection to the semiconductor devices in the event of an output short circuit.
